Granny Flat Prices Australia: The 2026 Line-Item View

Cost table Costs as of Sep 2026 Verified Last verified 2026-09-22
Quick answer

The granny flat prices Australia publishes in writing are caps, approval fees and cost indexes, not build quotes: area caps from 60 to 90 m² by state, certificate fees from $73, council application fees from $1,500, and an official construction cost index up 3.8 percent over the year. Build prices live in quotes, bracketed below by two labelled industry estimates.

Ask what a granny flat costs in Australia and search hands you a bracket with no source. The published record works differently: governments publish the caps, the approval fees and the cost indexes around a build, and no one official publishes the build price, because it is set per site and per quote. This page separates the two, tabulates what governments actually publish, and labels the industry benchmarks for what they are.

What governments publish

Three kinds of price-related numbers exist in official sources. Size caps, which bound the product: 60 m² in NSW, Tasmania and Victoria's planning pathway, 70 m² in Western Australia and South Australia, up to 90 m² in the ACT. Approval fees, published in council schedules. And cost indexes, which track what construction input and output prices are doing nationally. Building approvals statistics carry no granny flat classification at all, so even the official counts cannot answer "how many are being built" without a caveat.

State-by-state table

State Cap or pathway Published fee anchor As of
NSW 60 m²; complying development on 450 m²+ lots, no development application $1,800 all-in CDC (Wollondilly, under $200k); certificates $73+ 2026-27 schedules
Victoria Small second home to 60 m² without planning permit (VC253); building permit always Building permit from council as RBS: new single dwelling minimum $3,200 (Knox) FY 2026-27
Queensland No statewide statutory cap; Brisbane City Plan applies 80 m² GFA within 20 m (a state design code in force 1 September 2026 sets siting standards, not a size cap) DA application $1,500 (secondary dwelling, Domestic type B) FY 2026-27
South Australia 70 m², self-contained, up to 2 bedrooms (Code v2024.23) Fee tables load as verified Sep 2026
Western Australia 70 m² exempt from planning approval (R-Codes); building permit always Fee tables load as verified Sep 2026
Tasmania 60 m² secondary residence; 90 m² uplift in consultation Fee tables load as verified Sep 2026
ACT 90 m² secondary residence, all residential zones Fee tables load as verified Sep 2026
NT 80 m² in zones H, A, RL, R; 75 m² elsewhere Fee tables load as verified Sep 2026

Caps and pathways reference each state's rules profile on this site, where every row carries its own verification date.

The official index anchor

The one official price series that touches every granny flat quote is the ABS Producer Price Indexes. In the June 2026 quarter, the index for input to house construction stood at 167.8, up 2.1 percent for the quarter and 3.8 percent over the year; output of house construction rose 5.9 percent annually, with the strongest state spreads in Tasmania at 11.5 percent, Western Australia at 8.8 and South Australia at 8.5. A quote from early in the year and a quote from now can both be honest and still disagree by exactly that movement.

Published build-price ranges

Two industry benchmarks bracket the build, both estimates and neither official. On one side, factory unit pricing: Superior Granny Flats, an east-coast builder, publishes complete unit prices from $117,900 to $139,900 on its own range, with a published service addition of $10,900 where the unit sits within 12 metres of the main house; it is one builder's list, undated, and belongs in every comparison basket with that label attached. On the other, custom-dwelling rates: the RLB Rider Digest for Sydney prices custom-built dwellings at $2,500 to $7,600 per square metre, Q4 2025, with GST, site works and drainage among its listed exclusions. A 60 m² unit read against the RLB rates spans a huge range precisely because site works and specification, the lines the digest excludes, are where granny flat projects actually diverge.

The quote-driven lines

Four lines sit outside every published schedule: foundations, chosen from what the soil report supports; service connections, driven by trenching distance to sewer, water and power; delivery and crane, driven by distance and site access; and the unit itself, driven by layout and specification. The factory route prices those four together with the unit, confirmed per order, which is why this page brackets them instead of averaging them.

FAQ

No official national price exists, and any single bracket hides more than it says. What can be quoted with sources: approval fees of $1,500 (Brisbane) to $1,800 (Wollondilly NSW) for published granny-flat application lines, certificate fees from $73, and two industry build benchmarks, $117,900 to $139,900 from one east-coast factory builder and $2,500 to $7,600 per m² for custom dwellings in the RLB Sydney digest (Q4 2025). Treat both benchmarks as estimates and get a quote for the lines that matter.

Because prices are set per project, not per state. The national statistics office does not even carry a granny flat category in its approvals data; building approvals are classified by building type, and planning approvals sit outside those counts entirely. What governments do publish is every cap and fee around the build, which this page tabulates instead.

NSW has the most compressed pathway: a complying development on a 450 m² lot carries no development application at all and a published all-in council price of $1,800 in one schedule. Brisbane charges a $1,500 application line for a secondary dwelling. Approval cost and approval speed are different questions, and the clocks live on the timeline page.

Usually not, and the exclusions are the tell. The RLB digest explicitly excludes GST, site works and drainage from its per-square-metre rates, and factory builders price the unit separately from foundations, delivery and connections. Ask any quote to split those four lines before comparing it to another.

Factory direct

Ex-works granny flat pricing, confirmed per order

Layout, quantity and destination port in. Factory price with a freight and loading plan out in one business day.

Get a factory quote
Sources & verification
  • ABS, Producer Price Indexes Australia (6420.0), June 2026 quarter, released 31 Jul 2026; abs.gov.au (accessed 2026-09-21)
  • ABS, Building Approvals Australia (8731.0), Jul 2026, released 1 Sep 2026, and methodology; abs.gov.au (accessed 2026-09-21)
  • State rules profiles (NSW, VIC, QLD, SA, WA, TAS, ACT, NT), each independently verified Sep 2026; this site
  • Wollondilly Shire Council and Penrith City Council fee schedules 2026-27 (accessed 2026-09-21)
  • Brisbane City Council, Development Assessment and Compliance Fees 2026-27 (accessed 2026-09-21)
  • Knox City Council, building fees current from 1 Jul 2026 (accessed 2026-09-21)
  • Rider Levett Bucknall, Rider Digest Sydney 2026, custom dwellings $2,500-$7,600/m², Q4 2025; rlb.com (accessed 2026-09-21)
  • Superior Granny Flats, published unit price ranges (single-builder industry estimate, undated page) (accessed 2026-09-21)
  • planning.wa.gov.au ancillary dwelling information sheet (updated 15 Apr 2026); PlanSA ancillary accommodation FAQ (Apr 2024); State Planning Office TAS SPP Amendment 01/2026 consultation (accessed 2026-09-21)
Verified 2026-09-22 by SunModu Atlas
Corrections

Something look off: a fee, a date, a rule? Email tianxin@sunmodu.com. Every message gets reviewed and accepted fixes are dated right here on the page, and with your okay, we'll thank you by name for pointing it out.